windows_ad_join Resource

This page is generated from the Chef Infra Client source code.
To suggest a change, edit the windows_ad_join.rb file and submit a pull request to the Chef Infra Client repository.

Resources Reference page

Use the windows_ad_join resource to join a Windows Active Directory domain.

New in Chef Infra Client 14.0.

Syntax

The full syntax for all of the properties that are available to the windows_ad_join resource is:

windows_ad_join 'name' do
  domain_name          String # default value: 'name' unless specified
  domain_password      String
  domain_user          String
  new_hostname         String
  ou_path              String
  reboot               Symbol # default value: :immediate
  reboot_delay         Integer # default value: 0
  workgroup_name       String
  action               Symbol # defaults to :join if not specified
end

where:

windows_ad_join is the resource.
name is the name given to the resource block.
action identifies which steps Chef Infra Client will take to bring the node into the desired state.
domain_name, domain_password, domain_user, new_hostname, ou_path, reboot, reboot_delay, sensitive, and workgroup_name are the properties available to this resource.

Actions

The windows_ad_join resource has the following actions:

:join: Join the Active Directory domain (default)
:leave: Leave an Active Directory domain and re-join a workgroup
:nothing: This resource block does not act unless notified by another resource to take action. Once notified, this resource block either runs immediately or is queued up to run at the end of a Chef Infra Client run.

Properties

The windows_ad_join resource has the following properties:

domain_name

Ruby Type: String | Default Value: The resource block's name

An optional property to set the FQDN of the Active Directory domain to join if it differs from the resource block’s name.

domain_password

Ruby Type: String | REQUIRED

The password for the domain user. Note that this resource is set to hide sensitive information by default.

domain_user

Ruby Type: String | REQUIRED

The domain user that will be used to join the domain.

new_hostname

Ruby Type: String

Specifies a new hostname for the computer in the new domain.

New in Chef Client 14.5

ou_path

Ruby Type: String

The path to the Organizational Unit where the host will be placed.

reboot

Ruby Type: Symbol | Default Value: :immediate
Allowed Values: :delayed, :immediate, :never, :reboot_now, :request_reboot

Controls the system reboot behavior post domain joining. Reboot immediately, after the Chef Infra Client run completes, or never. Note that a reboot is necessary for changes to take effect.

reboot_delay

Ruby Type: Integer | Default Value: 0

The amount of time (in minutes) to delay a reboot request.

New in Chef Infra Client 16.5

workgroup_name

Ruby Type: String

Specifies the name of a workgroup to which the computer is added to when it is removed from the domain. The default value is WORKGROUP. This property is only applicable to the :leave action.

New in Chef Infra Client 15.4

Common Resource Functionality

Chef resources include common properties, notifications, and resource guards.

Common Properties

The following properties are common to every resource:

compile_time

Ruby Type: true, false | Default Value: false

Control the phase during which the resource is run on the node. Set to true to run while the resource collection is being built (the compile phase). Set to false to run while Chef Infra Client is configuring the node (the converge phase).

ignore_failure

Ruby Type: true, false, :quiet | Default Value: false

Continue running a recipe if a resource fails for any reason. :quiet will not display the full stack trace and the recipe will continue to run if a resource fails.

retries

Ruby Type: Integer | Default Value: 0

The number of attempts to catch exceptions and retry the resource.

retry_delay

Ruby Type: Integer | Default Value: 2

The retry delay (in seconds).

sensitive

Ruby Type: true, false | Default Value: false

Ensure that sensitive resource data is not logged by Chef InfraClient.

Notifications

notifies

Ruby Type: Symbol, 'Chef::Resource[String]'

A resource may notify another resource to take action when its state changes. Specify a 'resource[name]', the :action that resource should take, and then the :timer for that action. A resource may notify more than one resource; use a notifies statement for each resource to be notified.

If the referenced resource does not exist, an error is raised. In contrast, subscribes will not fail if the source resource is not found.

A timer specifies the point during a Chef Infra Client run at which a notification is run. The following timers are available:

:before: Specifies that the action on a notified resource should be run before processing the resource block in which the notification is located.
:delayed: Default. Specifies that a notification should be queued up, and then executed at the end of a Chef Infra Client run.
:immediate, :immediately: Specifies that a notification should be run immediately, per resource notified.

The syntax for notifies is:

notifies :action, 'resource[name]', :timer

subscribes: Ruby Type: Symbol, 'Chef::Resource[String]'

A resource may listen to another resource, and then take action if the state of the resource being listened to changes. Specify a 'resource[name]', the :action to be taken, and then the :timer for that action.

Note that subscribes does not apply the specified action to the resource that it listens to - for example:

file '/etc/nginx/ssl/example.crt' do
  mode '0600'
  owner 'root'
end

service 'nginx' do
  subscribes :reload, 'file[/etc/nginx/ssl/example.crt]', :immediately
end

In this case the subscribes property reloads the nginx service whenever its certificate file, located under /etc/nginx/ssl/example.crt, is updated. subscribes does not make any changes to the certificate file itself, it merely listens for a change to the file, and executes the :reload action for its resource (in this example nginx) when a change is detected.

If the other resource does not exist, the subscription will not raise an error. Contrast this with the stricter semantics of notifies, which will raise an error if the other resource does not exist.

A timer specifies the point during a Chef Infra Client run at which a notification is run. The following timers are available:

:before: Specifies that the action on a notified resource should be run before processing the resource block in which the notification is located.
:delayed: Default. Specifies that a notification should be queued up, and then executed at the end of a Chef Infra Client run.
:immediate, :immediately: Specifies that a notification should be run immediately, per resource notified.

The syntax for subscribes is:

subscribes :action, 'resource[name]', :timer

Guards

A guard property can be used to evaluate the state of a node during the execution phase of a Chef Infra Client run. Based on the results of this evaluation, a guard property is then used to tell Chef Infra Client if it should continue executing a resource. A guard property accepts either a string value or a Ruby block value:

A string is executed as a shell command. If the command returns 0, the guard is applied. If the command returns any other value, then the guard property is not applied. String guards in a powershell_script run Windows PowerShell commands and may return true in addition to 0.
A block is executed as Ruby code that must return either true or false. If the block returns true, the guard property is applied. If the block returns false, the guard property is not applied.

A guard property is useful for ensuring that a resource is idempotent by allowing that resource to test for the desired state as it is being executed, and then if the desired state is present, for Chef Infra Client to do nothing.

Properties

The following properties can be used to define a guard that is evaluated during the execution phase of a Chef Infra Client run:

not_if: Prevent a resource from executing when the condition returns true.
only_if: Allow a resource to execute only if the condition returns true.

Examples

The following examples demonstrate various approaches for using the windows_ad_join resource in recipes:

Join a domain

windows_ad_join 'ad.example.org' do
  domain_user 'nick'
  domain_password 'p@ssw0rd1'
end

Join a domain, as win-workstation

windows_ad_join 'ad.example.org' do
  domain_user 'nick'
  domain_password 'p@ssw0rd1'
  new_hostname 'win-workstation'
end

Leave the current domain and re-join the local workgroup

windows_ad_join 'Leave domain' do
  action :leave
  workgroup 'local'
end

Was this page helpful?